https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/148073/openroads-end-section-tie-to-active-terrainWhat causes the end conditions to not intersection the active terrain? I have an active terrain and there is enough room for the end condition to the to the existing terrain. The template end conditions have &quot;check for intersection&quot;, &quot;place point at intersectionen-USTelligent Community 12https://communities.bentley.com/thread/576861?ContentTypeID=1Fri, 27 Mar 2020 14:25:10 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2a81ab26-2470-4a62-8964-1e5cd4ce3e99Marc Blancher<p>Hello Justin, I haven&#39;t had any feedback on this issue so not sure if my suggestion was helpful. What I meant is that your corridor calculate cross sections at a defined interval, if you display a cross section between these calculated XS, it&#39;s possible that the end-condition doesn&#39;t tie accurately to the terrain. Hope my explanation is clear enough.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/576855?ContentTypeID=1Fri, 27 Mar 2020 13:30:30 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3b306d22-b07f-4930-88fa-612255cbb2f3Justin Luna<p>Marc, could you elaborate on how to fix the issue? I have specific cross culverts that I need cross sections for but I keeping running into the issue as mentioned above.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/450697?ContentTypeID=1Mon, 12 Mar 2018 15:57:39 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ebbb4e05-f075-4d54-bace-35273298702fMarc Blancher<p>Hi Arthur, have you checked if the template drop and the cross section intervals have the same multiple? OpenRoads calculates the end conditions at every drop interval and interpolates the value between them. If your cross sections are displayed between these intervals, it can be the reason.</p><div style="clear:both;"></div>