ORD Release 2 - Problem Creating Cross Section Drawings

I'm attempting to create cross section drawings in ORD and am getting stuck in the process.  I open my file, open the "Place Named Boundary" menu from the OpenRoads Drawing Production tab, pick my alignment and fill in the required information making sure Create Drawing and Show Dialog are checked at the bottom and click to except in my 2D view.  At this point the Place Named Boundary menu should remain open and the Create Drawing menu should open as well.  Unfortunately though the Place Name Boundary menu closes and the Create Drawing menu never opens.  I get a message at the bottom of the screen saying the file contains no boundaries but my cross sections do show up in my 3D view.  Does anyone know why the Create Drawing menu never opens allowing me to create my cross section sheets?  Here is a link to a YouTube video showing what is happening.

https://youtu.be/Ly4DEScVfUQ

  • When I was attempting to create the cross sections described above I was using one of the design files provided with the Bentley LEARNserver.  I closed this file and opened one of the other delivered design files and had no problem.  The cross section sheets created just fine.  Not sure what the issue was with creating the XS in the first file but I'm going to withdraw my request for help and assuming things are working as they should....until they don't in the future.

    Answer Verified By: Chris Booth