https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/148281/ord-update-2-questions-about-civil-accudrawCouple questions regarding civil accudraw in ORD update 2. First, is there a way to save custom civil accudraw tools for the vertical and section windows? I can do this for horizontal window, but not for the other windows. Next, there doesn&#39;t seemen-USTelligent Community 12https://communities.bentley.com/thread/451905?ContentTypeID=1Mon, 19 Mar 2018 16:17:13 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:e8e56a08-919c-4076-9d06-87bf54424f6bSanders Thomas<p>Hi Mark,</p> <p>Regarding saving custom Civil AccuDraw tools, could you clarify vertical and sections window? If you are referring to a Profile View and Cross Section Model, saving your settings with the Civil AccuDraw tool displayed will retain the Civil AccuDraw tool position.</p> <p>Z value (settings) are available from the Default-3D view if you are working in a 2D file.</p> <p>A slope can be placed by following the link below; however, I also filed Enhancement 864679, Draw a defined slope in cross section view using Civil AccuDraw with our Development group.</p> <p><a href="/products/microstation/f/z_-archived-microstation-v8i-forum/62691/how-do-you-draw-a-3d-line-at-a-specified-slope-only-using-v8i">https://communities.bentley.com/products/microstation/f/z_-archived-microstation-v8i-forum/62691/how-do-you-draw-a-3d-line-at-a-specified-slope-only-using-v8i</a></p> <p>I hope this helps.</p> <p>Sanders</p><div style="clear:both;"></div>