Annotation Group - Drawing and Linear in ORD upd. 3

The quick answer is to set the Annotation Group to the correct group that you want to use within the Create Drawing dialog.

If you want it to default to this location, you will need to watch training videos on workspace setup for ORD. Here's a link: https://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=111346&mcId=102596. The step 7 video series goes over Sheet creation.

Hi Holly

I use Annotation Group called SM_Profile_2018_04_18 which is based on Profile Grid. My problem is that I don't know how I connect it to our Linear Profile Annotation caller SM_Profile_Annotation

Hi Holly

I use Annotation Group called SM_Profile_2018_04_18 which is based on Profile Grid. My problem is that I don't know how I connect it to our Linear Profile Annotation caller SM_Profile_Annotation

The Linear Annotation Group should be called out by the Feature Symbology of the profile's Feature Definition. When you go to use the command Annotate Model, it will use this Annotation Group to annotate based on how the Feature Definition is defined. I would make sure that the profile you are trying to annotate has a Feature Definition. Then make sure that the Feature Definition's Feature Symbology is pointing to the Annotation Group.

Could you maybe post some screenshoot which help me to understand the location of Feature Symbology. 

/Sigfus

See this wiki: https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/36305/what-is-an-annotation-group.

Sorry, but I have not been able to locate where I change Profile Feature Symbology for my profile :-(

1. Write down the name of the Feature Definition assigned to your profile
2. Open Explorer
   1. 
3. Go to the OpenRoads Standards tab and expand Feature Definitions to navigate to the location of the Feature Definition of your profile.
   1. 
4. Right click on the Feature Definition name and select Properties.
   1. This is where you change the Profile Feature Symbology
   2.