Horizontal Alignment Graphics

Question

Hi there, 
 I'm using Power InRoads V8i ss4, and I have created a geometry project and a horizontal alignment. 
 The problem I'm having is that when I select "View Geometry > Active Horizontal", I get duplicate station and curve labels. 
 I had to change the scale factor of the drawing, and the station and curve labels didn't update to the current scale. I selected "View Active Horizontal" and I got duplicate labels. One at the current scale and one at the previous scale. I there any way to keep Inroads from updating the labels everytime I select "View Geometry"? Or to just update dynamically?

Chris Key · Accepted Answer

If you go to Tools > Locks in the InRoads Explorer, do you have the Delete Ink lock turned OFF? If you are using the Pen/Pencil Mode as the blue Pen and you have the Delete Ink turned off, it will keep all the graphics there any time you keep running the commands. If you want it to delete and refresh the annotations from the command, you must have the Delete Ink Lock turned on. You will need to delete all the annotation graphics because they need to be redrawn with the correct lock value set. Once deleted, change this lock to ON and then run the command so the graphics are created with the correct lock. Then any time you run it again, it should work. 
 
 https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/4145/video-inroads-8-9-using-the-pencil-pen-delete-ink-locks

Horizontal Alignment Graphics

Top Replies