https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/154618/pivoting-method-for-super-elevation-in-mx-roadHi All, Can Someone explain me the pivoting methods available in MX Road for super elevation. I know the first three but can not understand another three (in green box) Thanks!en-USTelligent Community 12https://communities.bentley.com/thread/648653?ContentTypeID=1Sat, 08 May 2021 14:55:45 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ae892b56-c738-4022-9599-6945f0da5e67Ashok Kumar<p>The two on the <span>right are for single camber roads as Mark said, are options not available in OpenRoads Designer. At least I cannot find it the Pivot method under SE section. Can somebody confirm?</span></p><div style="clear:both;"></div>https://communities.bentley.com/thread/461932?ContentTypeID=1Tue, 22 May 2018 08:35:19 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:41e96c6a-0591-4e6b-8976-d115eb0c98f7Santosh Kumar Rai<p>Thanks Mark!</p><div style="clear:both;"></div>https://communities.bentley.com/thread/461931?ContentTypeID=1Tue, 22 May 2018 08:32:21 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:b99abe70-30b1-4329-80a7-d7fbe38df2b0Mark Marnell<p>The bottom left method is pivoting about the carriageway edge, with the crown (centreline) and other edge being amended. The two on the right are for single camber roads i.e. no centre crown, and are either raising or lowering the other edge.</p><div style="clear:both;"></div>