https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/155343/corridor-rejecting-target-aliasingHi, I am trying to do a simple target alias for a ditch profile. I have the template setup up so the ditch target a linear vertical and the feature name shows under the target alias list the issue is when I add the profile from the list of the targeten-USTelligent Community 12https://communities.bentley.com/thread/463525?ContentTypeID=1Wed, 30 May 2018 20:47:39 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:5b2b4c8a-02f6-49a4-9142-d1925e60463fKarim Meleka<p>Hi Holly,</p> <p>thanks for the reply, I managed to solve the issue in a similar way&nbsp;that you suggested.</p> <p></p> <p>thanks</p> <p>Karim</p><div style="clear:both;"></div>https://communities.bentley.com/thread/463441?ContentTypeID=1Wed, 30 May 2018 13:16:03 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:83879e4e-fb59-4dd2-81cd-9334c853a527Holly Herring<p>Hi Karim,</p> <p></p> <p>I would try removing the profile as an external reference, then re-adding it, and try again to do the corridor aliasing. Do you get any error message when the corridor processes? I can look into it further if you post your data.</p> <p></p> <p>Holly</p> <p></p><div style="clear:both;"></div>