ORD U3 - Template Point Properties Update (Use Figure I Enter)

Hi Josh

Are you editing an existing template or creating a new one ? Not that it should make any difference.

Just confirm your work flow please ?

I'm going in to a template and then picking a point, then Right Hand Mouse Edit Point. Then you are changing one of the constraints and want to put a lope of 50 % in ?

Is this your workflow ? r have I misunderstood ?

Thanks

Simon Pegg

Bentley Civil Support

Hi Josh

Are you editing an existing template or creating a new one ? Not that it should make any difference.

Just confirm your work flow please ?

I'm going in to a template and then picking a point, then Right Hand Mouse Edit Point. Then you are changing one of the constraints and want to put a lope of 50 % in ?

Is this your workflow ? r have I misunderstood ?

Thanks

Simon Pegg

Bentley Civil Support

Hi Simon,

I've not paid enough attention to know if it only occurs when creating a new template or if it happens when editing an existing template.

Currently I'm creating new templates and I am following a similar work flow to what you have described above. Double click on a point, select Slope, type 50, Enter, result is 5000%

It's a huge deal but obviously it shouldn't happen.

Josh

If you type 50 - without the % sign - it will multiply by 100 to give you 5000%. Type 50% - this is how it has always been.

Could it not automatically assume that I am entering a percentage value?

There is a reason the software doesn't assume all values are percentage.  You can enter ratio values as well for slopes 1/6 = 16.6667%, 1/4 = 25%, 1/3 =33.333% etc...

Ah, understood