https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/15706/transition-of-template-drops-in-a-circular-alignmentdoes the transition template works in a circular alignment? I am designing a roundabout, using the crown lines as alignment, in the beginning of the curve The template width is 3 m, in the midle 4m. What I se after I create the surface is thaten-USTelligent Community 12https://communities.bentley.com/thread/31018?ContentTypeID=1Fri, 16 Jan 2009 20:12:46 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:1f1fe853-c27f-4ba3-8edb-bb5d3d98608bDenis Schaffer<p> Nikolin, </p> <p> The way you describe it, it sounds like that the horizontal constraint has not been released.&nbsp; Thus, the template doesn't change until it gets to the next template drop. </p> <p> Denis </p><div style="clear:both;"></div>https://communities.bentley.com/thread/30975?ContentTypeID=1Fri, 16 Jan 2009 19:04:34 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ad2c320c-d25a-4501-9204-aadf80c9b678nikolinyes, Ihave putted a template drop 3m at the beginnig and 4 at the midle, 3m again at the end. like this doesn't work, I found a other solution using a secondary alignmet as poin control. this way works perfectly. thnx for the answer.<div style="clear:both;"></div>https://communities.bentley.com/thread/30951?ContentTypeID=1Fri, 16 Jan 2009 17:57:15 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c4e58045-34a5-433a-9cc0-b90be092262fThomas Taylor [Bentley Civil]<p> Nikolin, </p> <p> This approach should work. Are you placing a 3m template drop at the start station and a 4m template at the stop station? </p> <p> Thomas&nbsp; </p> <p> &nbsp; </p><div style="clear:both;"></div>