Create Geometry by Template - cannot get it to display all points on template

RE: Create Geometry by Template - cannot get it to display all points on template

caddcop — Wed, 25 Nov 2020 14:01:56 GMT

I see this is an older thread, but I recently encountered this and due to other posts, figured out my own solution. I'll post my thread as a link, but the issue appears to be coincident points. It stops plotting lines when it gets to the coincident points - plotting one of the points but nothing past it.

[IR/Ss10] Create Geometry by Template - not displaying all points in template.

RE: Create Geometry by Template - cannot get it to display all points on template

Christopher Mexas — Wed, 22 Aug 2018 14:11:03 GMT

Marc,

The gutter flow line, top of curb and back of curb feature definitions are all set to "Create Template Geometry", yet they don't always display, and I can't figure out what makes them display when I use one template, and then the same features wont display when I am using another.

I checked to make sure that the feature definition names are the same between templates, and that doesn't seem to be the problem. In fact, I am using the templates and feature definitions that come with Power InRoads, not a customized set of standards, and I still can't get it to behave as I think it should behave.

Thanks,

Chris

RE: Create Geometry by Template - cannot get it to display all points on template

Marc Bachand — Wed, 22 Aug 2018 11:22:03 GMT

I have hardly ever done this but my guess is that each feature definition needs to have the "Create Template Geometry" set to true in order for it to create 2d geometry.

Marc