No cross sections stored in design file messagehttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/168193/no-cross-sections-stored-in-design-file-messageI have cut cross sections in my design file and the alignment and profile are there in the same file, but when I try to use the cross section navigator or label-er I get the message below. I am using Power GEOPAK V8i 08.11.09.878en-USTelligent Community 12RE: No cross sections stored in design file messagehttps://communities.bentley.com/thread/482075?ContentTypeID=1Tue, 18 Sep 2018 18:28:28 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:474ac71e-bb5a-417d-9c08-87a8ad44fc4dNico Roman<p>Do you have geopak xs cells in the file? turn on all levels and check.</p> <p><a href="/products/road___site_design/f/geopak-inroads-mx-openroads-forum/168193/no-cross-sections-stored-in-design-file-message">https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/168193/no-cross-sections-stored-in-design-file-message</a></p><div style="clear:both;"></div>