Hi,
I'm placing a civil cell for my 30+ driveways. I have my driveway alignment and profile designed for all driveways. I see something absurd on few driveways, and I think specifically on the left side of the mainlane!
See attached snapshots - one with a good placement and other one with spikes.
Any thoughts here, why shall be this happening?
If you upload your data set i'll take a look.
https://bentley.sharefile.com/r-rb9d2154eadf4c89a
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Hello Marcus,
Thanks for responding back so quickly.
I've uploaded the dgn files on the sharefile link you provided.
Please open the "Corridor.dgn " file and it will pull up all the references you need in the same attachment.
Just FYI - These dgn's are created in PowerGeopak SS4 878 version. Do not open in ORD.
Let me know, your findings.
Thank you,
Abhiram
Can you check dgnlib if these cells have valid for placement set to “no”?https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17107/civil-cell-valid-for-placement-setting
This is usually a good indication that the civil cell needs to be dropped. In video here around 6 min 19 sec mark there’s a brief explanation. https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/18371/video-civil-cell-creation