design input report ord station in mm instead of metr

RE: design input report ord station in mm instead of metr

Mark Bos — Fri, 19 Oct 2018 09:19:00 GMT

Hi Chuck,

thanks for the reply. I will make service request.

RE: design input report ord station in mm instead of metr

caddcop — Mon, 15 Oct 2018 12:39:51 GMT

Unfortunately, we are not on Connect yet. I think you need to log this with Bentley as a Service request.

RE: design input report ord station in mm instead of metr

Mark Bos — Sun, 14 Oct 2018 19:03:48 GMT

Hi Chuck,

If tried to change format of station but if gives an error.

System.Xml.Xsl.XslTransformException: An error occurred during a call to extension function 'stationFormat'. See InnerException for a complete description of the error. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.

at Bentley.CifNET.GeometryModel.Tools.Reports.XmlReports.ReportBrowser.FormatAsStation(Double value, Double defaultUnitsToMeters)

at Bentley.CifNET.GeometryModel.Tools.Reports.XmlReports.ReportBrowser.stationFormat(Double value, String externalStatName)

--- End of inner exception stack trace ---

Something wrong with my Units? They are all in meters

I don't know were to change String externalStatName

Do you know anything about this

Mark

RE: design input report ord station in mm instead of metr

caddcop — Sat, 13 Oct 2018 14:03:37 GMT

There is a dialog box accessed on the Report Browser menu that allows changing units, angles, station format. I can’t recall it’s name but you’ll know it when you find it.