When I make a corridor report design input, the station read out is in mm while design file setting units is in meters. Does anybody know what's happening?
Stop station should be 690.000
Hi Chuck,
thanks for the reply. I will make service request.
Unfortunately, we are not on Connect yet. I think you need to log this with Bentley as a Service request.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
If tried to change format of station but if gives an error.
System.Xml.Xsl.XslTransformException: An error occurred during a call to extension function 'stationFormat'. See InnerException for a complete description of the error. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.
at Bentley.CifNET.GeometryModel.Tools.Reports.XmlReports.ReportBrowser.FormatAsStation(Double value, Double defaultUnitsToMeters)
at Bentley.CifNET.GeometryModel.Tools.Reports.XmlReports.ReportBrowser.stationFormat(Double value, String externalStatName)
--- End of inner exception stack trace ---
Something wrong with my Units? They are all in meters
I don't know were to change String externalStatName
Do you know anything about this
Mark
There is a dialog box accessed on the Report Browser menu that allows changing units, angles, station format. I can’t recall it’s name but you’ll know it when you find it.