Control point between two points when using point controls

Question

Hi guys, 
 Is it possible to have Point 2 fixed, so it will always stay right in the middle of point 1 and 3, even though point 1 connect to an alignment using point control? 
 Furthermore i would like if Point 2 could have a fixed slope to both points. 
 
 Kind regards

Adam Wieczorek · Accepted Answer

For the Horizontal Point Constraint (double click on point) next to the value you will find "=" sign. This is the Value Equation, for Multiplier enter 0.5 and your point will be always in the middle. As per second part of your question, I don't think it is possible to have point exactly in the middle and with fixed slopes from two other points unless these slopes are equal. If slopes to be equal, than the point will always be in the middle. 
 
 aw

Control point between two points when using point controls

Top Replies