Is there a way for OpenRoads to draw a "Cross Section Cell" automatically when using it's Create Cross Section tool from the Corridor Modeling Tool Set rather than having to use the Applications > GEOPAK > ROAD > Cross Sections > Draw Cross Section Cells tool which you have to do individually?
OpenRoads Designer, or Geopak SS4?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Microstation 08.11.09.832
Geopak 08.11.09.878
Microstation : 08.11.09.832
Geopak : 08.11.09.878
So this is Geopak SS4, not OpenRoads designer. That makes a difference. OpenRoads designer will not create cross section cells at all because it doesn't use them.
It's been a couple of years since I used Geopak SS4. It's a hybrid of OpenRoads technology mixed with original Geopak - I'm not sure it uses cross section cells either. Hopefully someone who uses that package regularly will be along to confirm or deny that.
I know that the cells can be included. I believe the switch is simply to select the "Stacked" Layout option in the Create Cross Section dialog under the General settings.
www.envisioncad.com
ORD - 10.12.02.04 / 10.10.21.04 / 10.10.01.03 / 10.08.01.33Power GEOPAK / Power InRoads - 08.11.09.918Civil 3D - 2021 / 2022