How to change the Base Civil Product for Roundabout Tools

Re: How to change the Base Civil Product for Roundabout Tools

Bob Mullenix - MtDOT — Wed, 28 Oct 2009 00:32:26 GMT

We just started installing V8i and attempting to use roundabouts.

One of the users is getting this error message "Please activate a Bentley Civil Product to enable the Roundabout Tool" also. This happens when he tries to Place a Roundabout.

When I attempt the same task it works for me...

Neither of us have a CIVIL folder in the Bentley directory.

We do have the correct .cfg files and they match. What would be different to cause this situation.

MS 08.11.05.17

Geopak 08.11.05.39

Re: How to change the Base Civil Product for Roundabout Tools

JSP — Wed, 08 Jul 2009 13:56:58 GMT

Robert,

Any updates on this.

Regards,

Junz

Re: How to change the Base Civil Product for Roundabout Tools

Robert Garrett — Tue, 10 Feb 2009 16:49:54 GMT

OK. Let me do some more checking.

Re: How to change the Base Civil Product for Roundabout Tools

JSP — Tue, 10 Feb 2009 16:21:02 GMT

Robert,

The lines commented still error occur.

Regards,

Junz

Re: How to change the Base Civil Product for Roundabout Tools

Robert Garrett — Mon, 09 Feb 2009 21:18:37 GMT

Junz

The application used for Roundabouts is determined by the BentleyCivil CFG files. There are 5 of these in the ...MicroStation\config\appl directory. The one named Bentley Civil Roundabouts.cfg is the one you are interested in.

What happens is that if MX is loaded, it takes precendence over Geopak or INroads if they are loaded. This is only an issue for people like you who have multiple products installed.

Thomas's advise should have been sufficient but alas the executable he mentioned is apparently faulty. So don't blame Thomas, his advise is always spot on but in this case, we left him in a lurch. Blame me.

Here's what should work for you:

First check the geopak.cfg file and make sure the following line is in there. It should be. If it is not then add it.

MSCIVIL_PRODUCTDRIVER_APPLICATION=Geopak

If this does not fix it, then in the roundabouts.cfg file look for the following lines:

%elif defined (_MCRUN) # Geomacao settings

%if defined (MX_START) # MX settings

MSCIVIL_PRODUCTDRIVER = Bentley.Civil.ProductDrivers.MX.1.5
MSCIVIL_DGNPRESENTATION_ENABLERS < Bentley.Civil.ProductDrivers.MX.MSPlugIn.1.5
MSCIVIL_MODELEXTENSIONS < Bentley.Civil.ProductDrivers.MX.MXMapper.1.5
Default_MX_Symbology < publicstyles\mxroad.pss

%elif defined (_MCRUN) # Geomacao settings

MSCIVIL_PRODUCTDRIVER = Bentley.Civil.ProductDrivers.Geomacao.1.5
MSCIVIL_DGNPRESENTATION_ENABLERS > Bentley.Civil.ProductDrivers.Geomacao.MSPlugin.1.5
MSCIVIL_OBJECTHANDLERS > Bentley.Civil.ProductDrivers.Geomacao.Microstation.1.5

%else # Inroads and Geopak settings

# Give a default value to MSCIVIL_PRODUCTDRIVER_APPLICATION
# in case it is not defined in the application cfg
#
%if !defined (MSCIVIL_PRODUCTDRIVER_APPLICATION)
MSCIVIL_PRODUCTDRIVER_APPLICATION=InRoads
%endif

MSCIVIL_PRODUCTDRIVER = Bentley.Civil.ProductDrivers.$(MSCIVIL_PRODUCTDRIVER_APPLICATION).1.5
MSCIVIL_DGNPRESENTATION_ENABLERS < Bentley.Civil.ProductDrivers.$(MSCIVIL_PRODUCTDRIVER_APPLICATION).MSPlugin.1.5
MSCIVIL_OBJECTHANDLERS > Bentley.Civil.ProductDrivers.$(MSCIVIL_PRODUCTDRIVER_APPLICATION).Microstation.1.5
%endif
%endif

Put a pound sign (#) in front of the underlined above. This will comment them out.

PLease note the following: Really the only thing you get from registering roundabouts with Geopak is the ability to use a DDB file for symbology. The commit button to create cogo chains and points is currently not supported for Geopak.

Hope this helps. If not then let me know.

Re: How to change the Base Civil Product for Roundabout Tools

JSP — Mon, 09 Feb 2009 20:14:44 GMT

Thomas,

I run the above application still the same error i've got. Im using Geopak V8i version.

Regards,

Junz

Re: How to change the Base Civil Product for Roundabout Tools

Thomas Taylor [Bentley Civil] — Mon, 09 Feb 2009 17:46:13 GMT

Junz,

There is an executable located in the folder where the roundabouts are installed. By default they are installed in the
C:\Program Files\Bentley\Civil\08.09\ChangeCivilApplication.exe. run this .exe and select the civil product you wish to have integrated.

HTH

Thomas