RE: MX Roads SS4 Interchange Design.

snehasish mondal — Fri, 14 Dec 2018 11:06:36 GMT

Okay. Thank you.

RE: MX Roads SS4 Interchange Design.

Mark Marnell — Fri, 14 Dec 2018 08:26:55 GMT

There is nothing special about an interchange as compared to a simple junction, other than the fact there are more connections. Create your master strings horizontally and vertically, and then create/edit the other strings required.

There is an input file in the "C:\Program Files (x86)\Bentley\MX V8i (SELECTSeries 4)\MX\MFW\xx_tut" folder called 'thor105.inp'. Create a new MX project in a new folder, using IMPERIAL units, and input this file. It will create a trumpet shaped interchange, with a set of drawings.You can use this as an example 'training' dataset You will need to analyse the input file to understand the steps taken.

NOTE:This was a testing file from a long time ago, and has not been updated. If you have any issues, you will have to edit the file to correct them - it is not supported.