How to Model an asymmetric Intersection using DOT&#39;s pre-built Civil Cellshttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/172396/how-to-model-an-asymmetric-intersection-using-dot-s-pre-built-civil-cellsI have modeled 4 intersections using DOT&#39;s Civil Cells but they were all symmetric. This last intersection that I am working on is asymmetric and extremely annoying. The intersection in 2D can be seen here: I am using DOT&#39;s pre-build civil Cellen-USTelligent Community 12RE: How to Model an asymmetric Intersection using DOT's pre-built Civil Cellshttps://communities.bentley.com/thread/497119?ContentTypeID=1Mon, 17 Dec 2018 16:13:23 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f14a8a63-509c-46d4-823a-e4d1e028beffMark Marnell<p>I have found that when the civil cell &#39;drops&#39; to a strange elevation, it is normally means that one of the cell features was not able to be created. In this case, the left EOP does not seem to be able to resolve itself around the bend - could that be because the main line EOP does not extend far enough for the left edge of junction to find it (for example).</p><div style="clear:both;"></div>RE: How to Model an asymmetric Intersection using DOT's pre-built Civil Cellshttps://communities.bentley.com/thread/497118?ContentTypeID=1Mon, 17 Dec 2018 15:58:48 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:eaa9d9fb-9565-485c-860d-43177d7e9c2bMarc Blancher<p>Hi Daniel, can you upload your files here: <a href="https://bentley.sharefile.com/r-r7bc8a7164904a178">https://bentley.sharefile.com/r-r7bc8a7164904a178</a></p> <p>and I will have a look.</p><div style="clear:both;"></div>