Hi,
I am facing problem in super elevation application. by default it is showing AASHTO rules. since the project site is in middle east (Oman) , I would like to modify the super elevation rate and stations.
In Bentley website videos it is shown that we change graphically both stations and S.E. But I couldn't able to do it. even in the table ( below picture) also I am not able to change stations. please help me in solving this.
What software and version are you using?
Open Roads
Version? Are you on the 2018 Release 4 (10.06) version, or earlier?
it is 2018 Release 3.
Hi Mark,
thank you for your reponse. I am using 2018 Relese 3 _Open roads. could you help me in fixing this.
I would like to ammed super elevation either graphically or in table.
Is there any other workaround method to solve this.
looking forward to hear from you.
Select the superelevation section, and then pick the 'Superelevation view' option from the popup menu. The superelevation can be edited graphically in that view.
I think the problem may be that all of the AASHTO rule constraints are preventing you from making the precise edits you want. Some fields are greyed out because they are constrained to other superelevation points.
Try changing all of the constraints in the table to "None" and then making your changes. I usually get an error during the process of removing the constraints. All you have to do it close the superelevation editor, save and re-open the dgn. The error doesn't result in loss of data.
I've started importing my superelevations from CSV instead of using the automatic calculations, that way there are no constraints to remove.