Corridor move/rotation

Question

Hi, 
 I have a corridor, but the alignment was drawn in the wrong coordinate system. Is there a way to move and rotate the whole corridor to a new position? Something like you would move a simple geometry element. 
 Best regards, 
 Andrei

Mark Marnell · Accepted Answer

That looks like a mirror about the Y-axis, followed by a mirror about a 45 degree line.(I am not a mathematician, but that also looks like a clockwise rotation of 90 degrees - see my diagram. EDIT: I looked up the rotation and a 90 degrees clockwise rotation will transform (X, Y) to (Y, -X) as you want.). 
 Civil Transforms are move, scale and rotate - are you using the OpenRoads tools in PowerCivil, or the native geometry tools? There is the 'Transform Geometry tool in native commands. (I do not recall a Transform tool in the OpenRoads technology tools).

Mark Marnell · Answer

The following (working with an ALG as a test) gave the result wanted. Geometry > Utilities > Transform

Corridor move/rotation

Top Replies