ORD CONNECT 2018 R4 U6 10.06.00.38
I am currently working through the training module for viewing cross section models. When I got to the section for "Cut & Fill Graphics and Values" I went to the View Properties pull down and tried to click on "Display Cut & Fill Graphics " along with "Display Cut & Fill Values". When I clicked on one of the two boxes the dialog box disappears. I reopen it and click again, but it keeps disappearing and the box is not checked. After doing this a few times the dialog allowed me to check the boxes, but the display does not change. Upon reopening the dialog the boxes are not checked again. This is with the Bentley supplied dataset. I talked with a few co-workers who are working with a client supplied workspace and they are experiencing this same issue. They also stated that this worked in the previous version of ORD.
Can anyone verify that this functionality is lost with this version?
Yep, unfortunately broken in 2018 R4 (U6) and the other dynamic section view commands.
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.1 | ProjectWise 2023
I submitted a service request this morning for this issue. I will update if I receive any further information.
Thanks Rob!
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
"Defect 985125:[Dynamic Cross Sections] display cut and fill in dynamic cross sections is broken." has been filed and is scheduled to be resolved in the next release (update 7).
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Thank you for the response Marcus!
Was this defect fixed in a later version of ORD Connect?
Hi Krissy,
This works fine in ORD 2019 Release 2.
Thank you!