When creating multiple plan-sheets of a road in ORD CE, isn't it possible to manage the level display for all sheets at the same time..?
I have 27 sheets for a 30 km road and it seems really pointless that I have to open every single sheet to hide the same 10 levels, over and over again.. And if, for some reason, ORD decides to not save these level display settings (even though I keep hitting "save settings"...), I will have to do the same thing next time I open the file....
Hi Rikke,
I've been looking for a solution to the exact same issue and have found that this config variable seems to do the trick:
MS_LEVEL_DO_NOT_OVERRIDE_DESIGN_LEVELS_IN_SHEET = 1
In ORD I can now control my level display in my 3d model and see the cross section drawing and sheet models are synced automatically (or with reference reload if the cross section drawing/sheet models are open in a view).
This is what MicroStation Help says it does:
Controls the overriding of design model level properties in sheet and drawing models. If set to 1, the level properties of a design model and its reference attachments cannot be overridden in a sheet or drawing model. They will be the same as when the design model is opened directly.
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.2 | ProjectWise 2023
Hey Mark,
I've been dealing with the same issue where the level display in my design model does not control the display in my sheet models. I checked the config and saw that this variable was already set to 1, shown below. Am I missing something?
Thanks