I have created an overpass profile in PowerGeopak SS4 V08.11.09.904(Figure 1) but encountered an issue when trying to import it in Openroads Designer V10.06.00.38(Figure 3). When imported in Openroads Designer, it create a tangent line from PI of Sag Curve to PI of Crest Curve which resultPDF in Kink when creating a corridor model(Figure 3).
Is the fig 1 profile supposed to be the same as the fig 2 profile? they look completely different.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/175231/tangent-line-created-when-importing-from-powergeopak
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Nico,
The Figure 1 profile was imported in Figure 3 which has an issue with the Tangent Line. When i create the corridor model the kink is created at the VPI station of the Crest Curve in Figure 3. However in Figure 2, i don't have any issues with respect to the two curves which has Zero Tangent Length.
Regards,
Junil
ok, I would need to try it here to see. post the gpk and dgn here and the profile name.
Tangent Profile ORD.rar
Please find attach the required files in ZIP format for your perusal. The profile name is Main_P.
Sorry I can't open rar files. can you upload here?
https://bentley.sharefile.com/r-r9efec5f46bc4f82b
thanks