How do I get a radius read-out when tracking a horizontal alignment in OpenRoads Designer?When working with the old geometry projects in InRoads SS2 - SS4, we could use the horizontal tracking function (TOOLS > TRACKING > HORIZONTAL ALIGNMENTS) to see, what the radius of the alignment was at a certain location. This was very usefull in transition curves, where the radius changes between ∞ and the radius of the adjoining curve.
How do I get the same readout in OpenRoads Designer? The "Civil Analysis -> Analyze Point" does not seem to be able to give me the radius.
I am using OpenRoads Designer CONNECT Edition - 2018 Release 3 Update 5.
We have an enhancement for this ability already filed with development. It is something we are working to get added into the geometry tracking abilities through the Civil Analysis tools.
Enhancement 705993
This was also requested for the SS3/SS4 product. The enhancement has been filed and updated for OpenRoads Designer.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/102572/ss3-analyzing-reporting-analyze-point---radius-needed
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Thank you for the answer. I will keep InRoads SS2 installed for now.