Named boundary offset incorrectly

Question

Hi All, 
 
 I am having some trouble with a named boundary being offset slighty when using the civil plan feature of the named boundary tool to produce sheet models. 
 
 As you can see. The clipped boundary gets offset slightly. This only seems to happen when using the alignment in the attached file. Previously this geomtry had a station equation attached. However, I have set to zero and the issue still remains. When creating a new alignment or using a new piece of geomtery, it works fine. 
 1488.Geometry.dgn 
 Has anyone experienced similar? If so, what was the solution? 
 Thanks 
 Liam

Mark Shamoun · Answer

Hey Liam, 
 
 Looks like you may need to adjust your sheet seed drawing boundary. Should just be a matter of going into it and changing its extents.

mlemieux · Answer

So, I had this problem. The reason for my problem was the Drawing Boundary in the sheet model of the sheet seed dgnlib did not have the shape modified to match the named boundary clip shapes. By selecting on the graphic of the Drawing Boundary I was able to adjust the limits which then resolved these offset issues.