Version: 10.00.10.17
Can you provide a detailed description of your workflow to replicate the issue? I can't see much from the screen shot.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
http://www.okladot.state.ok.us/roadway/outgoing/1.png
http://www.okladot.state.ok.us/roadway/outgoing/2.png
http://www.okladot.state.ok.us/roadway/outgoing/3.png
Marcus, As you can see the third image generates the embankment, but the bridge deck end up being skewed to the alignment.
Marcus, Our IT folks has this link block, I have ask them to give me access. Waiting!.............. The file is 60megs zip. Any other location I can send you these files to?
Try this: https://communities.bentley.com/help/w/be_communities_help/7079/communities-secure-file-upload
Update:
It seems that the problem involves the alignment starting on a curve instead of starting with a line segment, and you can workaround this problem. Select the starting road segment, and click on it a second time to get the arrow manipulators. Click the starting station value and use the text manipulator to change it to something like 268+27.27. This extends it by some amount, adding a line segment in that new extended range. Then refresh the bridge and it will draw at the correct location.
There is a very small line segment at the start of the alignment, but something in the LEAP bridge code we use has a tolerance and the segment is too short compared to the tolerance. You'll just needs to drag out the alignment a bit to get a slightly longer line segment at the start.
Please try and let me know your outcome.
Marcus Blake
Technical Support Engineer
Answer Verified By: Marcus Blake
Thank you Marcus, It is amazing something little as this could cause this issue. But it does make a lot of sense. It is working now.
Hi, I encountered the same issue in placing railway bridge along the corridor (corridor is imported as xml/ created by using civil3d).
It's is continue being misplaced (plus, piers/abutment is not shown at all) although I have tried what was guided as above. I tried to move the bridge that I first created on the straight part of alignment to curved part by editing text manipulator, but the number values something like 268+27.27 that I type, whatever number it is, it is highlighted in red, and no other new notifications or messages are shown, nothing changes. Do you know why this bridge placement issue is keep on coming up?? Is there any other ways that I can modify this?? Is it possibly because of the corridor was created by using civil 3d?? would this issue be solved if I use openroads designer or any other bentley software??
Looking forward for your help! & Thank you very much in advance!