https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/178423/milling-report-stations-wrong-08-11-09-897When I use the Milling Report tool, my stationing is all wrong. I found this article from Chris Key and copied the new report but the stations are even worse. The true start station in my model is 555+91.90 but the imperial report station is 8+38.95 en-USTelligent Community 12https://communities.bentley.com/thread/575124?ContentTypeID=1Wed, 18 Mar 2020 20:23:08 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f8fe762e-5f52-4aa5-a8c0-fc4d47cc7f40Jennifer Perry<p>Sanders, has this issue been resolved yet?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/566396?ContentTypeID=1Wed, 29 Jan 2020 14:15:02 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:7ff8e5ca-287f-4dc9-bcdb-a9fa3af44128Errick Gray<p>I am running GeoPAK 08.11.09.903 and this is still an issue. Is there a temporary solution or workaround? I would really like to use the milling report even if some conversions are needed. Is that possible? Is there a logical approach to the information being produced by the report?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/517965?ContentTypeID=1Mon, 22 Apr 2019 13:43:52 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ad08e3ff-671b-4cb5-9995-38de2a54ff2dSanders Thomas<p>Hi Chuck,</p> <p>This issue was previously elevated to our Development group as Defect 804759 - <em>Milling Report internal and external stations are incorrect</em>.</p> <p>Regards,</p> <p>Sanders</p><div style="clear:both;"></div>