ORD Profile disappears

RE: ORD Profile disappears

Warren McLachlan — Tue, 25 Jun 2019 13:45:51 GMT

Hi Dalek

I think this might be the cause - the one user who has been experiencing this problem has a PowerDraft and an OpenRoads Designer WorkSpace.

RE: ORD Profile disappears

Dalek — Tue, 25 Jun 2019 12:28:56 GMT

I believe my problem was due to having 2 WorkSpaceSetup.cfg files. One was local and the other was on the network drive. I removed the local WorkSpaceSetup.cfg and used my network version. My profiles have worked successfully since the change.

You might want to try loading the Bentley delivered WorkSpace & WorkSet. If they work without error then you have something wrong in your custom WorkSpace or WorkSet.

Marc B,

Compress on exit is disabled. I keep both horizontal & vertical geometry in the same DGN file.

RE: ORD Profile disappears

Dalek — Tue, 25 Jun 2019 12:26:30 GMT

You might want to try loading the Bentley delivered WorkSpace & WorkSet. If they work without error then you have something wrong in your custom WorkSpace or WorkSet.

Marc B,

Compress on exit is disabled. I keep both horizontal & vertical geometry in the same DGN file.

RE: ORD Profile disappears

Marc Bachand — Tue, 25 Jun 2019 11:19:30 GMT

I have seen this same behavior as well.

A couple of questions:

Do you have compress on exit toggled on in your user preferences? I was told by Bentley that compressing the dgn file at any point causes weird things to happen with non-indexed (profile or XSC) models.
Are you using any type of live nesting to attach your horizontal portion of the geometry to the profile drawing. I have also seen issues here when live nesting was set to level 2 in the default model to attach the horizontal geometry.

Hope this helps.

Marc

RE: ORD Profile disappears

Ashanty Tlhapane — Tue, 25 Jun 2019 07:49:40 GMT

Hi Dalek

Did you find a solution to your problem? I'm having the same issue.