Hi,
Is there the automatic catchment delineation tool in openroads?
Thank you in advance.
In the latest version, there is auto-catchment feature in Subsurface Utilities.
You access the feature when you place a storm water catch basin, and you pick a terrain model as the reference element for elevations. we need the terrain model as the surface to run the delineation on. See the following SIG:
https://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=111750&mcId=102713
2019-03 (March) OpenRoads Subsurface Utility SIG - What’s New in Subsurface Utility Design and Analysis
Answer Verified By: Sotiria Kalaitzidou
Can the automatic catchment delineation be turned off? I have an existing inlet placed and do not want the catchment updated when I rotate or change the inlet type.
I have not tried it, but if the feature definition is using it, then I would say no.
Hi There,
Does anyone happen to know if there is a way to add in the automatic catchment delineations "After" a network has been placed. Or, would you have to delete everything and then place al the nodes again with the toggle turned on?
Thanks in advance!
No - you cannot add the auto catchment after the networks has been placed.
@Mark Marnell, That's correct. I've placed a network into a model and was wondering if there is a way to calculate the catchments after the fact which doesn't seem to be possible. Thanks for the response. Cheers!
yes it would very handy to be able to select a network and have all catchments calculated similar to CivilStorm functionality.