Importing dwg file in open roads to create terrain model

Hello Sai,

You will need to create the terrain model from a dwg file using the "Graphical Filter". Step 1 is to attach the dwg as a reference, in OpenRoads Designers, and then create graphical filters for same.

A video demonstrating the procedure is  given in the link below:

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/35134/video-create-terrain-from-graphical-filter

Hope this helps. Do let me know.

Hello Amita,

I've followed the same procedure, but I have spots and break lines so I've created two filters one is for spots and the other is for break lines, when I select the filter from the group after the "data point to accept selection" it is processing for few seconds and showing an msg that no matching elements found. 

Hello Amita,

I've followed the same procedure, but I have spots and break lines so I've created two filters one is for spots and the other is for break lines, when I select the filter from the group after the "data point to accept selection" it is processing for few seconds and showing an msg that no matching elements found.