ANNOTATION OF SURVEY DATA POINTS IN LATITUDE AND LONGITUDE

Question

I have my survey data file(.dwg) . I want to show (display) the latitude and longitude (in degree, minutes, seconds) of each point. 
 If anyone can suggest anything....

Tom Felcone · Answer

Vaibhav, 
 To work with Lat\Long you need to have a geographic coordinate system attached. You won't be able to do that if the file is an dwg so first save to dgn. 
 
 You need to have a Geographic Coordinate System Attached. You can find this under TOOLS > GEOGRAPHIC > SELECT GEOGRAPHIC COORDINATE SYSTEM Select appropriate coordinate system

Look for the coordinates in the lower right, left click on them and select ACS Position. If you do not have Running Coords. Turned on, turn them on now (right click, make sure RUNNING COORDINATES is checked).

If you do this and you still see Northing and Easting, From the Main Menu Bar go to UTILITIES > AUXILIARY COORDINATES. In the Auxiliary Coordinates Dialog double click on your coordinate system. You should now see Lat/Long displayed instead of Northing/Easting 
 
 Tom F.

Tom Felcone · Answer

Vaibhav, 
 Look for the coordinates in the lower right, left click on them and select ACS Position. 
 Also, your coordinate system needs to be active - If Military Grid WGS84 is correct, fine. If you want to use UTM84-44N then you'll need to double click on it and make it active. Tom F.

Tom Felcone · Answer

Try this VBA: 
 https://communities.bentley.com/products/geospatial/desktop/w/geospatial_desktop__wiki/6580/--label-latitude-and-longitudes-vba 
 It worked for me in v8i SS4, but not CONNECT (it's very clear about that)

Mark Marnell · Answer

See the MVBA in your other post about this topic.