Any input file to know the existing ground levels for 1) just under the proposed centre line & 2) at 15 m offset from design centre line on either side using MX Roads SS4 V8i ??

RE: Any input file to know the existing ground levels for 1) just under the proposed centre line & 2) at 15 m offset from design centre line on either side using MX Roads SS4 V8i ??

Mark Marnell — Thu, 11 Jul 2019 09:26:04 GMT

My 177 options are creating new strings Txxx - my model and strings names are only examples, replace them with your model and string names. I placed the new strings in a new model just to keep them separate from the design model.

I did not assign any FNS/PSS to the model as I am only reporting it - you can assign what you like.

RE: Any input file to know the existing ground levels for 1) just under the proposed centre line & 2) at 15 m offset from design centre line on either side using MX Roads SS4 V8i ??

VAIBHAV GAURKAR — Thu, 11 Jul 2019 09:20:55 GMT

Please explain these commands:

section,ground trian,refs model
section,model 2
177,mast,tx00,tc00
177,cl00,tx00,tl00
177,cr00,tx00,tr00
999

can I write above lines as below:

section,TRIA 0 TO 15,DESIGN50
section,model 2

177,mast,tx10,CM00

177,CML0,TX10,CML0

177,CMR0,TX10,CMR0

999

(DESIGN MODEL=DESIGN50,DESIGN CENTRE LINE=MC00, TRIA MODEL=TRIA 0 TO 15,TRIA STRING-TX10,STRING UNDER MC00=CM00,string at 15m left offset=CML0,string at 15m right offset=CMR0

what style set & feature set to give to model 2?

RE: Any input file to know the existing ground levels for 1) just under the proposed centre line & 2) at 15 m offset from design centre line on either side using MX Roads SS4 V8i ??

Mark Marnell — Thu, 11 Jul 2019 07:09:26 GMT

Create two lines at the required offset
design,refs model
100,mast,,cl00,7=-15
100,mast,,cr00,7=15
999
Create a model to store the sections
create,model 2
Section the triangulation along the strings
section,ground trian,refs model
section,model 2
177,mast,tx00,tc00
177,cl00,tx00,tl00
177,cr00,tx00,tr00
999
Take cross sections - labelled 'A' here
at every point on MAST (173)
or at defined interval (174)
section,model 2,refs model
section,model 2
173,mast,,A,7=-20,10=20
or
174,mast,,A,10,7=-20,10=20
999
Delete strings if not needed
edit,refs model
004,3=cl00
004,3=cr00
999
Report the points on the sections
There will be 3 points per section - left, centre, right
report,model 2
992,a
999