Hello all,
I installed the current version of InRoads (ir81109918en.exe) on top of my MicroStation V8i SS4 V08.11.09.862 running on a Workstation with Microsoft Windows 10. The Installation of InRodas works fine and finished without any error message.
When I have started Inroads the first time, I 've received a .net error. I eliminate it by commenting out the line with "InRoads_SS4=1" in file "InRoads.3.1.cfg" as suggested in https://communities.bentley.com/products/road___site_design/
After that MicroStation starts but in the end of loading a dgn a error message "Failed to load INROADS.3.1.DLL" appears. The new microstation menue entry "Application" is empty.
Can someone help me with this Problem? What's going wrong with the Installation?
Regards,
Daniel
Hi Dan,
Not sure if it helps with your situation or if it has been resolved. I had a similar issue and the reason on my end was due to having GEOPAK SS4 installed on the system, along w/ Microstation SS4 and inRoads SS4. After removing GEOPAK and re-installing InRoads, I no longer get the error message and I can actually see the "InRoads Group v8i" splash screen. Checking Applications menu shows "InRoads Group v8i" as normal w/ MicroStation.
If you don't have GEOPAK installed, maybe another SS4 software is installed and conflicting with InRoads causing it to not launch properly? Hope this helps
Yes, you can download it here: https://softwaredownloads.bentley.com/en/ProductDetails/1862
I was not aware that there was an InRoads Ss10 - is the also a Power InRoads Ss10?
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
Hi Daniel and cadcop,
I'm not confusing SS10 and Windows 10, I'm just saying that InRoads SS10 (The version Daniel tried to install (ir81109918en.exe) ) works only with MicroStation SS10. If you go to the software download page and expand the arrow on the left you can see that the dependency is MicroStation SS10 version 08.11.09.912, screenshot below. If you can't see it or download it it's because this version of MicroStation is archived and therefore you have to download instead the release 08.11.09.916 of MicroStation which is available.
Daniel, as InRoads SS10 will not work with MicroStation SS4 and if you want to download an archived version of InRoads compatible with your version of MicroStation you need to raise a Service Request. But I'm not sure why you wouldn't upgrade your MicroStation toward SS10?
Hi Marc,
it's confusing me. The Bentley Download Service website provides only one installer for MicroStation V8i.
Where can I get the right InRoads installer for our MicroStation V8i (SELECTseries 4) environment (version 08.11.09.862)?
regards,