Openroads 2019 r2 is out, what have been fix? What is new?

Now with the ability to label crossing feature names in cross sections, labelling at irregular chainages for start and ends of each profile drawing, profile alignment name title annotation, export of profile 3d cuts to DWG, and more - delushionally waiting for Bentley to provide a Defects/Enhancement list like all the other Bentley software... 

How do you manage the labeling at irregular chainages for start and ends of each profile drawing?  I could not figure it out?

Try using the Horizontal Increments along Horizontal Alignment option with a very large spacing (so no intermediate points are labelled)

I found this out by accident - I really wish this was communicated to the users. So much trial and error!

Wow Thanks Mark It worked as a charm.  I don't think it was intended for this use but it work perfectly.  Thanks for sharing!

Going to keep this one in the back pocket for later. Thanks, Mark!

Hi Mark, thanks for this tip. This works well at the end of profile.

Would you know how to annotate start and end of each profile drawing model when split into sheets? We often use viewport lengths that translate into chainages that are not rounded to 10 or 20 etc. so this would be a great feature. And also since overlap in profile sheets to match overlap in plan doesn't seem to be available when using plan and profile workflow.

Regards,

Mariusz

Hi Mark, thanks for this tip. This works well at the end of profile.

Would you know how to annotate start and end of each profile drawing model when split into sheets? We often use viewport lengths that translate into chainages that are not rounded to 10 or 20 etc. so this would be a great feature. And also since overlap in profile sheets to match overlap in plan doesn't seem to be available when using plan and profile workflow.

Regards,

Mariusz