What have been fix in this release?
Anything fix with DWG export?
What is new?
Thanks
Hi Mark, thanks for this tip. This works well at the end of profile.
Would you know how to annotate start and end of each profile drawing model when split into sheets? We often use viewport lengths that translate into chainages that are not rounded to 10 or 20 etc. so this would be a great feature. And also since overlap in profile sheets to match overlap in plan doesn't seem to be available when using plan and profile workflow.
Regards,
Mariusz
OpenRoads Designer 2022 R1
Funny thing is for plan elements, one good way to export to Autocad is to attach the DGN in reference and then merge it (bind it) into your drawing. Everything is read correctly and you don't have to export nothing. The only problem is for profile alignement who are not read by autocad, sadly.
Be aware that the reference attachement is quite long (between 2 and 5minutes)
It is exactly as you said for our efforts to export DWG files. But we exclusively want to separate models, alignments and drawings in different files. In our case length of the circular arcs are missing. It would be great if referenced files can be exported without any problem.
Going to keep this one in the back pocket for later. Thanks, Mark!
Hi Jeremie, I generate this profile drawing from the same file as my alignment and this was the outcome when i export out to DWG format.There is a go around solution for this issue by doing some settings on the reference options during the export process where I need to export twice with different settings each. Lastly I will need to combine both profile as 1 in order to get the perfect profile drawing in DWG format. This will be quite troublesome if many profiles needed to be exported.