DEM.Tif Surface is importing in at wrong elevation

The apparent answer to this is

Defect 536259: Import Terrain from ERDAS IMG does not use the geo source correctly

In this defect, they also use the TIF to try to create the terrain and it had the same result with an incorrect location.

My work around was, hold on I am about to swear "I used Civil3d" imported the tif and exported it as a dem and created a surface from the C3D dem file.

The apparent answer to this is

Defect 536259: Import Terrain from ERDAS IMG does not use the geo source correctly

In this defect, they also use the TIF to try to create the terrain and it had the same result with an incorrect location.

My work around was, hold on I am about to swear "I used Civil3d" imported the tif and exported it as a dem and created a surface from the C3D dem file.

Thank you for letting us know about the defect!

Thanks for posting that - does anyone know if this is being addressed?

I believe I have also used the Transform Surface command in InRoads to rescale the elevations while retaining the northing and easting values.

But I also found the source data was often too much for InRoads and had to use Descartes to select a sub area from the data before I could move forward.