Hi,
there is an ORD's problem which I cannot solve for a very long time and since I did not get any response from Bentley on my SR the Communties is my last chance. I implemented ORD in quite a big project (12km of expressway) so we have plenty of road models. Most of them after reproccessing the corridor leave old elements. Sometimes these are lines, sometimes mesh components and sometimes everything. It's very annoying because I cannot find the reason for this and almost everytime it's something different. I thought that maybe clipping elements mess with corridor functionality (they do but in a different way), but after few tests I have excluded them as a reason of doubling corridor elements. Our team is terribly frustrated of losing precious time because most of the times the only solution is to make a new clean, file, which will be infected after few weeks or even days.
Is there anyone who had similar issues or knows something about this defect? I would be grateful for any reponse.
Regards
Krzysztof Jędrych
Does this issue occur when creating corridors in a pure 3D environment, not creating them in a 2D, and having the software create the 3D for you? I have not explored ORD Connect as extensively as others on this post, but this method of building corridors in a pure 3D environment has worked very effectively in the SS4 series of products.
Same here,but this is a first with this release: duplication of bad corridor 2D elements.
Hi Kevin,
Are these defects for the 3d features and meshes only? Anything for duplicated 2d corridor geometry that we're also seeing in some circumstances?
Regards,
Mark
OpenRoads Designer 2022 R3 (10.12) | Microstation 2023 | ProjectWise CE 3.4
Hi Chase,
We're also getting some instances of duplication happening with 2D corridor geometry?
To get rid of the mesh that it creates all you have to do is go to the 3D model and delete it as well as any other random 3D elements. To me the defect is not that it creates this mesh but the fact the mesh doesn't remember what it was created from and doesn't update when the corridor is altered.
Power GEOPAK SS4
&
OpenRoads Designer
both with StormCAD License