I am trying to view the cross sections but only see the center node at any station. I tried deleting the cross section view from the civil display browser but it is not listed there to delete.The view worked last week. The only elements in this file are the corridor elements, where everything else is referenced in. Any thoughts? Thanks
Couple items: What versions? We did do a few fixes to prevent this from occurring, we are currently 10.07.01.32. Have you tried cutting om the alignment instead of the corridor? Does it show? Also--remember you can cut corridor section from a reference file but you would need to use the Dynamic Section tool from the ribbon to select the referenced corridor instead of the pop up menu.
Joe Waxmonsky
Are there any other suggestions for this issue? I have even deleted the corridor and started over with no change.
This started happening after I deleted some view accidentally. I also remember when first using ORD I was able to hold down right click and select a set of views (plan,3d,xs,and profile) from a list but that option isn't available anymore. Both of those things happened at the same time
Try deleting/renaming your user preferences.
That brought back the view control thanks! still no luck with the xs
So I got them to work by create a new corridor file from the 2d seed file. To find out what was the issue I tried the "geometry dynamicsection deletedxsviews" key-in again and found that this is what made the components not show up in the dynamic cross sections view.
Is there a way to reverse this key-in besides undo (if the file has been closed).
Thank you!
not that I know of - Ive used it hundreds if times and never seen the issue. It should recreate fine next time
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.2 | ProjectWise 2023