Dynamic cross section view is not showing corridor

RE: Dynamic cross section view is not showing corridor

Dennis Wadas — Thu, 26 May 2022 22:10:42 GMT

This is 3 years too late, but this worked for me:

Dynamic Cross Section View is Blank - OpenRoads | OpenSite Wiki - OpenRoads | OpenSite - Bentley Communities

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 03 Dec 2019 20:42:20 GMT

I had to re-install the program because I found no solution.

RE: Dynamic cross section view is not showing corridor

Mark Shamoun — Tue, 03 Sep 2019 13:41:50 GMT

not that I know of - Ive used it hundreds if times and never seen the issue. It should recreate fine next time

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 03 Sep 2019 13:30:53 GMT

So I got them to work by create a new corridor file from the 2d seed file. To find out what was the issue I tried the "geometry dynamicsection deletedxsviews" key-in again and found that this is what made the components not show up in the dynamic cross sections view.

Is there a way to reverse this key-in besides undo (if the file has been closed).

Thank you!

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Fri, 30 Aug 2019 12:22:50 GMT

I created a corridor in the seed imperial 2D file and the cross sections show up, it's only in my files that they don't. Is there a way to check dynamic cross sections settings to compare?

communities.bentley.com/.../Example_5F00_Mainline-Corridor.dgn

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 18:15:54 GMT

That brought back the view control thanks! still no luck with the xs

RE: Dynamic cross section view is not showing corridor

Robert Watson — Tue, 27 Aug 2019 18:04:22 GMT

Try deleting/renaming your user preferences.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 17:57:28 GMT

This started happening after I deleted some view accidentally. I also remember when first using ORD I was able to hold down right click and select a set of views (plan,3d,xs,and profile) from a list but that option isn't available anymore. Both of those things happened at the same time

RE: Dynamic cross section view is not showing corridor

Robert Watson — Tue, 27 Aug 2019 17:43:24 GMT

Thanks, just covering the bases.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 17:34:24 GMT

all the references have all levels turned on

RE: Dynamic cross section view is not showing corridor

Robert Watson — Tue, 27 Aug 2019 17:31:24 GMT

Expand the ref.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 17:23:47 GMT

this has been the same

RE: Dynamic cross section view is not showing corridor

Robert Watson — Tue, 27 Aug 2019 17:22:10 GMT

Select the reference and not the main DGN.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 17:19:49 GMT

They are all on. It doesn't seem right that the only used level is default though.

RE: Dynamic cross section view is not showing corridor

Robert Watson — Tue, 27 Aug 2019 16:28:48 GMT

Do you have levels turned off in the view?

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 14:59:00 GMT

same issue

RE: Dynamic cross section view is not showing corridor

Mark Shamoun — Tue, 27 Aug 2019 12:07:59 GMT

Now try reopening cross section view and any change?

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Tue, 27 Aug 2019 11:41:42 GMT

When I do that it starts displaying the 3d view in the cross section window:

RE: Dynamic cross section view is not showing corridor

Mark Shamoun — Tue, 27 Aug 2019 09:11:16 GMT

Have you tried deleting your dynamic cross section views (using the "geometry dynamicsection deletedxsviews" keyin)?

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Mon, 26 Aug 2019 19:40:12 GMT

Are there any other suggestions for this issue? I have even deleted the corridor and started over with no change.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Mon, 19 Aug 2019 19:02:38 GMT

Something is weird because it wont let me select any of the elements that will display on the dynamic cross sections like cut/fill shapes.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Mon, 19 Aug 2019 18:57:55 GMT

It is not enabled in any of my reference files.

RE: Dynamic cross section view is not showing corridor

caddcop — Mon, 19 Aug 2019 18:55:21 GMT

Check that "ignore references when live nested" is not enabled, either for the 3D reference file or as a default attachment option.

RE: Dynamic cross section view is not showing corridor

Taylor Brownlow — Mon, 19 Aug 2019 18:49:16 GMT

Thanks, I tried all of those before with no luck.

RE: Dynamic cross section view is not showing corridor

Marcus Blake — Mon, 19 Aug 2019 18:43:20 GMT

This article has a few things to try.

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/42139/dynamic-cross-section-view-is-blank-and-missing-3d-components-in-openroads-designer