Hi there,
I am currently having an issue with the Subsurface Utilities within OpenRoads Desginer.
1. I want to create a new node which would be a rectangular or a triangular cross section, since there´s only trapezoidal cross sections for this, but I had no success (I have tried to solve this issue by going to the feature definition and creating new ones, creating new prototypes and new catalog itens). Is there a way to solve this?
2. After that I also want to create new sections for some conduit which would match with those cross section that I mentioned above, I thought that if I just changed the prototype it would work out but that haven´t been the case.
Thank you,
Tomás Cinquetti
Can you provide more detail? maybe some sketches, I can't really follow what you are asking.
thanks
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum#pifragment-25841=1
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki