I don't have a GPK or anything. I just need a few 2D ground lines cut from a surface.
Are you using OpenRoads? you can import the tin and create a terrain model, then create an alignment using the geometry tools and cut your xs.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/35102/video-create-terrain-from-tin-file
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/39118/video-horizontal-vertical-geometry-creation-example
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
No, I am using V8i with Geopak SS4 (I think).
ok. you can use the openroads tools, or create an alignment in cogo using geopak and run existing ground xs.
Where can I find OpenRoads tools in V8i Geopak? Also, are there step by step instructions on building a GPK file and an alignment in the link above? I use GPKs all the time, but never create them. Thanks.
when you open cogo and type a gpk number, it will create a new one if it doesn't exist. here is how you store a chain using store graphics.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/31705/store-chain-using-store-graphics
here are the wikis on openroads in ss4
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7021/ss4-ss3-openroads
Answer Verified By: Tamara Lynn