I don't have a GPK or anything. I just need a few 2D ground lines cut from a surface.
when you open cogo and type a gpk number, it will create a new one if it doesn't exist. here is how you store a chain using store graphics.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/31705/store-chain-using-store-graphics
here are the wikis on openroads in ss4
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7021/ss4-ss3-openroads
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Answer Verified By: Tamara Lynn
Where can I find OpenRoads tools in V8i Geopak? Also, are there step by step instructions on building a GPK file and an alignment in the link above? I use GPKs all the time, but never create them. Thanks.
ok. you can use the openroads tools, or create an alignment in cogo using geopak and run existing ground xs.
No, I am using V8i with Geopak SS4 (I think).
Are you using OpenRoads? you can import the tin and create a terrain model, then create an alignment using the geometry tools and cut your xs.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/35102/video-create-terrain-from-tin-file
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/39118/video-horizontal-vertical-geometry-creation-example