Hi,
For a custom Ribbon it would be fine if there was an overview of Civil Key-ins. For Example:
-How can we set a Feature Definition to a curtain one? -How can we attach a curtain Corridor to Geometry?
Regards,
Louis
Hi Louis,
There is no documented overview of Civil keyins I have seen but one is needed to allow users to streamline/automate modeming processes.
Some of the main Civil keyin groups I have found that can aid in automation is:
CIVILCOORD - Civil Accudraw commands
CORRIDOR - Corridor commands
GEOMETRY - Geometry commands
PLACE NAMEDBOUNDARY - Named Boundary creation commands
IFC - IFC Export commands
SITE - OpenSite commands
H3 - Subsurface Utilities commands
Regarding setting a Feature Definition using a keyin, ive tried to get this working in the past, but there doesn't seem to be a way to accomplish this...
Mark
OpenRoads Designer 2022 R3 (10.12) | Microstation 2023 | ProjectWise CE 3.4
Hi Mark,
Thanks! I already was afraid that should be the answer (regarding to the feature definitions).
Regards Louis
My testing with setting a feature definition by keyin has been frustrating. It sometimes seems to work, but the GUI does not seem to accurately reflect that the change was made. It reminds me of earlier versions of MicroStation where a custom tool that activated a command did not refresh the tool settings, but if one activated a view command and then exited it with a reset, the tool settings would finally reflect the change. A similar attempt for Feature Definitions did not work however.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
I have been trying to load and run mvba with a keyin in OpenRoads Designer Connect Edition. would you happen to know the keyin sequence?
I can do it thru Drawing>Utilities>VBA Manager>VBA Projects. I want to put the ketin under a toolbar button.
it is:
vba run [ProjectName]ModuleName.SubName
Here's some more info:
https://communities.bentley.com/products/microstation/w/microstation__wiki/21821/running-a-vba-routine-by-keyin