Is there a way to find surface areas of fill at specific elevations using the 3d model? For instance, we are designing a service road that will have 15-25 foot of fill and we need to use a chemical compound to make the compaction quicker. They are going to lay down a one foot lift of dirt, then spray on the chemical. We need to give them the areas of all those 1 foot lifts. I was curious if geopak lets you take horizontal slices or something similar. Any help on this would be great!
Thanks in advance!
Brent Mould
CDM Smith
Steven,
Yes, that would show the locations of each elevation, but is there a way to calculate the entire surface area of fill at the elevation, ie 621, 622, 623, etc.?