https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/187090/ord-2019-r2-refresh-preserving-custom-configurationsWe modified the ConfigurationSetup.cfg file to point to a networked workspace as a Custom Configuration. Then, we had to reinstall the refresh and apparently that process clobbered our customizations. So, what is the recommended approach to customiseen-USTelligent Community 12https://communities.bentley.com/thread/549156?ContentTypeID=1Wed, 16 Oct 2019 14:55:29 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:1c77e87a-4d49-411f-99d3-1271b546fdbdlilsweepr<p>I install our installations and even updates by using a batch file to initiate the install. We too have a &quot;pointer&quot; file for networked resources. Knowing that in the past Bentley overwrote delivered files I have a copy of our needed configurations on the serve to copy over after installation or upgrade. I also run other things from within the batch file. but most of it is personal preference.</p> <p>I do not run the update from the CONNECTION Client as I have the options to show updates turned off for each user. I instead create the install with the / layout switch so I do not have to download the components each time. I then run this from a location on the server.</p> <p>By using a batch file for me ensures that I have the best chance to install our cad products the same each time and therefore to hope make support easier, or same, from machine to machine.</p> <p>All this to say, once you have a working cfg copy it out so you can place it back at anytime needed no matter how you choose to get it there. </p><div style="clear:both;"></div>