https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/187530/export-to-dtmI am trying to export a terrain model as a dtm. The actual export seems fine. When I open another file and create a terrain from file, there are less contour lines and they are not in the same locations as in the model. Also, the contour call outs areen-USTelligent Community 12https://communities.bentley.com/thread/551287?ContentTypeID=1Mon, 28 Oct 2019 19:29:02 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:736b37be-d800-4506-b61f-1d6889e18715Ryan Pietila<p>When the window came up after I hit import, from file.&nbsp; The drop down menu for the source file was in feet and it was grayed out.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/551266?ContentTypeID=1Mon, 28 Oct 2019 16:53:57 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8b022b22-956e-42f8-9b49-bf28ccd1ec84Robert Watson<p>I have found that exporting a DTM, will revert back to original settings.&nbsp; Sounds like the original data you used was in Meters.&nbsp; ORD will represent the data however you want it.&nbsp; In this case it&#39;s in feet visually even if the dtm was in meters.&nbsp; You might be able to remove the direct link to the file in the Explorer and then export again.&nbsp; Export to XML and see what the header says the units are.&nbsp; Just throwing some things out there.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/550854?ContentTypeID=1Fri, 25 Oct 2019 05:47:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:b81bf17a-ded3-49ba-afd2-76400447f50cMark Marnell<p>From what you describe, it looks like there is a problem with the units you are using i.e. meters are correct. What units was the original data in? &#39;About 1/3&#39; is suspiciously close to 0.3048 (feet to meters).</p><div style="clear:both;"></div>