TRIA association in Vertical String Design

RE: TRIA association in Vertical String Design

MaryB — Fri, 03 Jan 2020 14:26:35 GMT

You may run into other weirdness, so keep your eyes open:

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/155751/ord-keeps-kicking-me-out/464365#464365

https://communities.bentley.com/products/microstation/w/microstation__wiki/38506/microstation-hangs-on-startup-after-windows-10-update-spring-creator-has-been-installed

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/157466/corridor-modeling-crash/469199#469199

RE: TRIA association in Vertical String Design

Stewart Smith — Thu, 02 Jan 2020 21:43:09 GMT

WORKAROUND: you need to open existing *MC20.drl file in /MXDATA folder add change/add the following.

Change the following:

NumofCuts=3

Add the following for surface 3:

Model3=TRI DESIGN MERGED

String3=

TriaString3=TX00

Sint3=0

SintOffset3=0

SintTolerance3=0

Offset3=0

OffsetVal3=0

Mask3=

Layer3=

LineColour3=1

LineStyle3=

Level3=

MLineColour3=7

MLineStyle3=0

MXLineColour3=7

MXLineStyle3=0

VBColour3=26623

MXRAIL3=False

MXRAIL_TYPE3=0

RE: TRIA association in Vertical String Design

Stewart Smith — Thu, 02 Jan 2020 21:15:39 GMT

Hi All

we've just upgrade all our laptops to win 10 version 1803 and install MXROAD 08.11.09.879...we are getting the same here, we can't add any additional triangulation models or add additional profiles or associated string (advance panel) as the arrow is missing to allow pull down box for selection....this is very annoying when you have multi surfaces to use when designing...how can we fix this??

RE: TRIA association in Vertical String Design

Mark Marnell — Fri, 06 Dec 2019 07:23:22 GMT

Thanks for the explanation. However, I do not have an answer to your issue - it seems to work fine on my machine.

I would suggest raising a Help Request.

RE: TRIA association in Vertical String Design

Prakhar Agrawal — Fri, 06 Dec 2019 05:57:42 GMT

Hi Mark!

Thanks for replying.

If I need to design the vertical alignment of centerline of my project road, I see the profile of the ground underneath it by associating the tria of the ground underneath. If need to see the ground under a crossroad cutting across my project road, I try to associate (display simultaneously with my main road and main ground's profile) the profile of the ground under that cross road. 'Usual way' for me is to go the 'Profile Surface Details' icon in the 'Add IP Mode' window while designing vertical alignment. Attaching a snapshot for the same.

RE: TRIA association in Vertical String Design

Mark Marnell — Thu, 05 Dec 2019 14:02:20 GMT

I do not understand what you mean by 'associate a triangulation' or 'to associate it the usual way'. What do you normally do?