Proposed ground not rpicking up all of the points from the corridor/templateshttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/189650/proposed-ground-not-rpicking-up-all-of-the-points-from-the-corridor-templatesI am having the issue shown above with my proposed ground. I generate the proposed ground from my corridor but it is obviously ignoring some of the points. So when I pull elevations there appears to be no curb in some locations. The thin white lineen-USTelligent Community 12RE: Proposed ground not rpicking up all of the points from the corridor/templateshttps://communities.bentley.com/thread/559893?ContentTypeID=1Mon, 16 Dec 2019 14:37:21 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:62baf950-ec8c-4a2a-ace9-2bc79962eac6Chris Munoz<p>That was it.</p> <p>Thank you</p><div style="clear:both;"></div>RE: Proposed ground not rpicking up all of the points from the corridor/templateshttps://communities.bentley.com/thread/558509?ContentTypeID=1Fri, 06 Dec 2019 19:27:13 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0870aea1-448c-452e-8b9d-b6cb07e08611Ray Thwaits<p>It looks like you have vertical segments on your curb, placing the top face of curb at the same horizontal position as the bottom face.&nbsp; Offset the top face of curb .001 from the bottom face.</p><div style="clear:both;"></div>