Hello everyone. I am learning to use ORD (specifically, OpenRoads Designer CONNECT Edition version 10.07.03.18), and I am experiencing an issue with scaling when referencing in a file.
I am attempting to reference in a file which includes contour lines. When I reference it in, the contour labels DO NOT scale according to the drawing scale of the file into which it is referenced. All other references scale correctly (including other annotation text in the file with the contour labels). If I open the file with the contour labels in it and adjust the drawing scale there, the contour labels DO change according to the drawing scale.
The issue I am having appears to be the same as the issue experienced by this individual (to which no solution was provided):
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/167534/annotation-of-terrain-contour-text-when-referenced---ord
If anyone could help me with this, I would appreciate it!
Strange question that may not apply...For the reference setting, do you have "Use Annotation Scale" turned ON or OFF?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Hi MaryB. In my "References" menu, I have the option "Use Active Annotation Scale". When I switch this on/off for other references, the scales of the annotations DO change. However, when I do this for the reference with the contour labels, the contour labels DO NOT change.
Strange...